Joelamite
04-20-2009, 04:10 PM
Ok guys, Selling my car.
1999 Monte Carlo bodied Mini Late Model Stock Car
Full Tube Chassis
2:18 at VIR full last Feb. on a slow track.
Chassis
Current NASA logbook
1.75 Round Tube Cage built on square tube frame. NASCAR-style door bars with plate.
Very Safe Cage, same as a Full size stock car around driver.
Suspension/Brakes/Wheels Tires
Front
Ford Pinto/Mustang II Spindles and Brakes. Carbo Tech xp10 Pads.
Afco Tubular control arms. Fully adjustable mounts. (Adjust Control arm angle roll center etc... without changing ride height)
Tubular lower control arms.
Mustang II rack and pinion steering.
Afco coil over shock/springs
Brand New Willwood dual piston master cylinder.
Standard StockCar sway Bar. Swap bar diameter to change rate.
Rear
Toyota Pickup rear. (Like a Ford 9in) 3rd member can be easily swapped to make track side gear ratio changes.
Honda Civic Front brakes mounted on the Toyota Rear
Adjustable rear brake bias.
3 link rear, all fully adjustable.
Afco coil over shock/springs
Chassis has been scaled to a 50.1% cross 50/50 F to Rear with 180 lbs driver.
6 13*10 Wheels
Hoosier 22x10x13 Road Race Slicks.
Will disclose source for used tires (20 bucks a piece) upon sale.
Engine
VG33E Nissan V6
Schneider Race Cams
Holley 2 barrel. Holley fuel pump
Carb Intake.
Headers with cross over and 2 into 1 side exit exhaust
Currently does not run, will need a rebuild or another junkyard engine.
Had Low oil pressure and I shut it off at VIR in Feb. Crank is tight/hard to turn.
Comes complete carb to oil pan.
Uses a vg30e Nissan engine from 84-89 300zx, maxima’s, pathfinders, trucks, quest/villager’s
Or a vg33e from xterra’s, frontiers, quest/villager’s
Currently has a junkyard vg33e from a 2002 villager installed, will include a good vg33e crank and vg30 block/heads as well.
Drivetrain
Nissan 300ZX 5 Speed Transmission
Stock clutch and flywheel
Toyota Rear
New Master and Slave Cylinder
Safety
Kirkey seat with right side head support
Has leg support extensions.
Current belts window net etc...
Fuel Cell
Spares
4 heads, Fuel Injection Intake complete. (Plans were to convert to FI)
1 crank 1 vg30e bare block.
Adjustable cam gears.
Countless tires.
New Spindles
Extra springs
Extra 4.11 3rd member (Rear-end)
Car is in Richmond VA. Some say the body is ugly, others love it this way. It’s like a mut. The Chassis is solid. Price reflects the ugliness of the body. Uses five star racing bodies if you want to look sweet. Put in a junkyard Nissan V6 and you will have a super fast car for under 3500 bucks. $3000 for the car + around $500 or so for a good engine.
The car is as it came off the track when the current engine expired.
Joe nasajoeser@yahoo.com
_________________
Joelamite
ASE Master Tech
1999 Monte Carlo ZX (The ugly black thing in stinger group)
1999 Monte Carlo bodied Mini Late Model Stock Car
Full Tube Chassis
2:18 at VIR full last Feb. on a slow track.
Chassis
Current NASA logbook
1.75 Round Tube Cage built on square tube frame. NASCAR-style door bars with plate.
Very Safe Cage, same as a Full size stock car around driver.
Suspension/Brakes/Wheels Tires
Front
Ford Pinto/Mustang II Spindles and Brakes. Carbo Tech xp10 Pads.
Afco Tubular control arms. Fully adjustable mounts. (Adjust Control arm angle roll center etc... without changing ride height)
Tubular lower control arms.
Mustang II rack and pinion steering.
Afco coil over shock/springs
Brand New Willwood dual piston master cylinder.
Standard StockCar sway Bar. Swap bar diameter to change rate.
Rear
Toyota Pickup rear. (Like a Ford 9in) 3rd member can be easily swapped to make track side gear ratio changes.
Honda Civic Front brakes mounted on the Toyota Rear
Adjustable rear brake bias.
3 link rear, all fully adjustable.
Afco coil over shock/springs
Chassis has been scaled to a 50.1% cross 50/50 F to Rear with 180 lbs driver.
6 13*10 Wheels
Hoosier 22x10x13 Road Race Slicks.
Will disclose source for used tires (20 bucks a piece) upon sale.
Engine
VG33E Nissan V6
Schneider Race Cams
Holley 2 barrel. Holley fuel pump
Carb Intake.
Headers with cross over and 2 into 1 side exit exhaust
Currently does not run, will need a rebuild or another junkyard engine.
Had Low oil pressure and I shut it off at VIR in Feb. Crank is tight/hard to turn.
Comes complete carb to oil pan.
Uses a vg30e Nissan engine from 84-89 300zx, maxima’s, pathfinders, trucks, quest/villager’s
Or a vg33e from xterra’s, frontiers, quest/villager’s
Currently has a junkyard vg33e from a 2002 villager installed, will include a good vg33e crank and vg30 block/heads as well.
Drivetrain
Nissan 300ZX 5 Speed Transmission
Stock clutch and flywheel
Toyota Rear
New Master and Slave Cylinder
Safety
Kirkey seat with right side head support
Has leg support extensions.
Current belts window net etc...
Fuel Cell
Spares
4 heads, Fuel Injection Intake complete. (Plans were to convert to FI)
1 crank 1 vg30e bare block.
Adjustable cam gears.
Countless tires.
New Spindles
Extra springs
Extra 4.11 3rd member (Rear-end)
Car is in Richmond VA. Some say the body is ugly, others love it this way. It’s like a mut. The Chassis is solid. Price reflects the ugliness of the body. Uses five star racing bodies if you want to look sweet. Put in a junkyard Nissan V6 and you will have a super fast car for under 3500 bucks. $3000 for the car + around $500 or so for a good engine.
The car is as it came off the track when the current engine expired.
Joe nasajoeser@yahoo.com
_________________
Joelamite
ASE Master Tech
1999 Monte Carlo ZX (The ugly black thing in stinger group)