|
Stirpicult 09-07-2002, 04:34 PM will an s13 steering wheel directly bolt on to a b13? i remember reading that for aftermarket steering wheels to fit we would need an s13 hub adapter (now i think sparco makes one for the b13), so does this mean that the steering wheel would bolt as well. thanks. Matt 09-07-2002, 06:35 PM I don't know first hand if it would fit, but I don't see why not. My momo adapter is for S13's as well as b13's. And I have a B14. 808se-r 09-08-2002, 03:54 AM i put a s13 240sx steering wheel on my car and it bolted straight up... i had to remove the cruise control though, since the 240 didn't have one, the plate on the back of the steering wheel only had 1 signal for the horn... http://home.hawaii.rr.com/eksjb/steering.jpg aztecred92 09-08-2002, 05:14 AM Since steering wheel fitment is the topic, here's my question. I've always liked the steering wheel from the 300ZXTT. Anyone know if it would fit on a B13? The thickness of the wheel is greater than the SE-R's and it also has the cruise control buttons built into the horizontal spokes of the wheel. Could be a nice swap. Stirpicult 09-08-2002, 12:06 PM i was told by a 240sx owner that the z steering wheel and the 240 steering wheel were the same minus the z emblem. i bought the sx wheel by the way. how hard is it to do the swap? 808se-r 09-09-2002, 01:11 AM it's really easy.. pop the center cover, unplug horn/cruise, remove nut, pull off the wheel.. must use some force, but watch your face.. hehe, i smacked mine.. thats it.. if you have cruise and the 240 didn't, you might need to sand down the back so the horn works properly.. | ||