I just got my Nissan motorsports motor mounts for my 91 Se-r. I am not sure if they gave me the right ones. I ordered the "engine torque mount set" part# 99996-1105g. I have the 2 mounts which have their own individual part# on them. I went to put the engine torque mount on and the holes are further apart than the stock mount. With the new mounts are they repositioning the engine/trans or are these the wrong mounts? The holes are 1-2 inches further apart than the stocks. Any info please let me know. Thanks.

I believe that these are what JWT sold as there own but cant anymore. So you should ask those with JWT mounts.

I found out today from Nissan Motorsports that they are the exact same mounts as the jwt ones. They both get them from the same manufacturer. JWT does NOT make them. They get them from another company. I talked to the guy for a while today. I told him that I bought the Torque set which is the engine torque and the trans torque mounts. He said that they do not offer the engine torque mount and the one in the catalogue for the sr20de is actually the one that fits the sr20det and the G20. So do NOT order the torque mount set for the Se-r's. They will be wrong. He said that the other 3 mounts that look alike are supposed to have the same part # for all 3. So I guess I go with the Energy Suspension mounts.

I just installed the rear solid motor mount on saturday. The only thing besides having a machine shop put the mount in the OEM case was to cut center tube (where the screw goes into) because one side is to long. All you have to do is cut it the same amount as the other one and your set:). Good luck.