Who's using rt v2 with a ve? [Archive] - SR20 Forum

: Who's using rt v2 with a ve?


Mr. Sleeper
07-06-2009, 08:33 PM
Ok I'm pretty stuck because I've searched and searched and it seems that I'm not going to find the info I need yet because this is still pretty new. My question is, "Is there a different xdf I have to download onto my rt v2 in order to use the launch control and vvl activation feature?" I can't seem to find info on this and was hoping that someone who has successfully installed this could plz give me a hand. I have a b13ve-ve injectors and de maf.

dfddfd2
07-06-2009, 09:19 PM
The XDF is a definition file used by TunerPro to display and edit the contents of an ECU bin file. The ECU bin file is then downloaded to the RTV2 board non-volatile (NV) memory to be executed by the CPU in the ECU. Just to make things even more interesting (read complicated), the RTV2 board has it's own CPU and firmware to control the extra inputs and outputs (I/O). The CPU on the RTV2 and the CPU in the ECU communicate and pass information back and forth to control the extra I/O on the RTV2 board.

The RTV2 firmware, ECU firmware, TunerPro XDF and ADX files, and documentation are under development to support programming the RTV2 inputs and outputs. Stay tuned to Calum's forum for more info.

Cheers,
Dave

gtswrx
07-06-2009, 10:22 PM
Email Calum

Mr. Sleeper
07-08-2009, 01:31 AM
Ok thanks guys:)