Spec-v Wannabe
07-14-2009, 07:34 PM
OK guys, I just installed my SAFC-II with the aid of the 'How-to" on it, and just wanted to go over some of the settings. Im getting tuned on saturday and just wanted to go over a few things. Everything for the moment is ok, and its running fine. But here are some things I wanted to double check:
Mods are: Stock DE, short ram intake, header, exhaust
1: The throttle setting is pointing to the upper right.. correct?
2: RPM reading is dead on at idle, then the car tach reads about 300rpm higher at higher RPMs. Ive read this is normal ... correct?
3: I have a stock Maf and my settings are 01 & 01 and my air flow seems to be good
I just wanted to double check everything before I went and had it tuned. Thanks for reading!!!
coach
07-15-2009, 10:13 AM
Yeah, you leave the numbers the same in/out when using stock maf and not adjusting. The idle difference is actually pretty common from what I have seen on the S-AFC and Neo devices. The throttle setting i can't remember that one.
brent
Spec-v Wannabe
07-16-2009, 06:23 PM
Yeah, you leave the numbers the same in/out when using stock maf and not adjusting. The idle difference is actually pretty common from what I have seen on the S-AFC and Neo devices. The throttle setting i can't remember that one.
brent
Does anyone know the DEC AIR settings?
eurokid21
01-02-2010, 10:16 PM
Does anyone know the DEC AIR settings?
right there with ya, along with the question of what hi throttle settings somebody has with it.
chris89
01-16-2010, 10:30 AM
OK guys, I just installed my SAFC-II with the aid of the 'How-to" on it, and just wanted to go over some of the settings. Im getting tuned on saturday and just wanted to go over a few things. Everything for the moment is ok, and its running fine. But here are some things I wanted to double check:
Mods are: Stock DE, short ram intake, header, exhaust
1: The throttle setting is pointing to the upper right.. correct?
2: RPM reading is dead on at idle, then the car tach reads about 300rpm higher at higher RPMs. Ive read this is normal ... correct?
3: I have a stock Maf and my settings are 01 & 01 and my air flow seems to be good
I just wanted to double check everything before I went and had it tuned. Thanks for reading!!!
i need help with my safc2 tuning i do have a wideband but i still *** wanna screw anything up im wondering if anyone has the same setup as me rs bov fmic stock maf walboro 255 fuel pump stock t25 turbo at stock psi... im just looking for some basic settings for now
akuma810
01-20-2010, 02:24 PM
http://www.sr20forum.com/1771336-post10.html