Greg need a price on OEM Main and Rod Bearings.

It's a High Port DE

Grades I have calculated needing:
34453 Main
1222 Rod

Also I can't find a cometic HG thats stock bore. I have been told to use the 87mm bore and it would be ok. Only reason I'm asking as I would want something a little thicker than stock DE because the head was milled very very lightly. Is the VE HG thicker or the same thivkness as a DE but Metal. Thats why I was thinking Cometic (can be little bit thicker) but I was still thinking OEM on the HG. Head was milled .006" IIRC

You can PM me or post here with how to order from you,prices , and paypal stuff.

Thanks

The mains are $75.75
rods are $53.76
thrusts $15.16

the VE metal is about the same as stock in compressed thickness (about 1.1mm or so). If the head and block have been decked, then it's OK to use metal, otherwise not. You can get thicker with the Cometic if necessary.

Your best bet at the moment is to call or direct email me.

Welcome Back from Vacation Greg!!! Although it's 6:50am central time I'm sure your not ready for work yet lol ;)




I'm a little excited to get my parts if you can't tell lol