kingofrock381
08-27-2009, 02:19 PM
LOWER PRICE 2,100!!!!:biggthump:confused:
1991 Sentra SE-R
Gun metal metallic its a fresh color, best G/M I could decide on
Second Owner!!!!
NEW ALTERNATOR Manufactured by Nissan!!!
NEW TIRES on 15x6.5 rims mag aluminum lighter the stockers !!!
NEW Engine 117,000 miles NO sledge!!
NEW O2 sensor
THE CAR IS FRESH!!!
The car has $6,000+ put into it and countless hours of love.
It was my daily driver,I'm not selling it because there something wrong, believe me I WANT TO KEEP it but alas my future depends on this sale.
comes with a spare head and various other parts....new wheel bearings, and brake pads as well
I purchased the car when I was 15 rebuilt it from the ground up, there isn't a nut or bolt that i haven't turned on the car. striped to bare metal, all rust Fixed correctly...I'll even give you a cut rate price to repaint it in the future...
while on the subject, the paint is bubbled on the hood from the heat when the old motor blew up, a chip by the passenger side door handle, and a bubble on each side where I fixed the rear fender wells. (BUT! they will ot come through the paint for another 2-3 years...) it has a det ow i the feder due to my girl frieds maniac brother tried to kill me with a saw saw and kicked the fender I can get a new one for 18$+ shipping and would be a tremendous opportunity to get the car painted at cost by my family's body shop. Any color but I would prefer that you paint it gun metal. BUT if you paid for it you could do what ever you want...
Engine
-New motor 117,xxx
-SS AC header, test pipe 2.5 HKS cat back w/ magnaflow muffler
-CAI - custom intake to behind headlight comes *** h Grass roots heat shield.
-Wire tuck- 80% concealed (makes it easier to work on, access is still easy)
-NGK ignition coil, NEW high power ignition chip, and 9mm wires
-battery in trunk
suspension
-AGX struts 4-way adjust in front, 8 in the back
-Full polly kit (all suspension, sweybars, 2/4 motor mounts)
-slotted and drilled rotors (gold calipers match valve cover and engine parts)
- new ball joints
-may fresh bolts from putting the poly kit on, especially in the back, Such as the 12"? bolts that hold the controller arms to the hub i the back (PITMFA to get out of the hubs FYI)
Exterior
I have a set of eagle hammer rims from 1991 15x 6.5 makes for some old school sickness
-blacked out headlights
-custom grill with death beam driving lights
-DE-badged
-200sx side skirts
-240sx front lip
-shaved antea
interior 8-10
-nice head unit (mp3 and sat alight ready)
-4 sony explode speakers
-oil pressure gauge
- blue led stock gauge interface
-seat belts to custom pillar belts
the car is super nice for the year you know how it is to find a b13 in good shape these days, let me know if your interested I'm Want to negotiate with my LOVE's buyer...believe me I'm screening out you kids that are going to wreck it...
It Needs:
rear driver side brake caliper, E brake cable, RED LInE super heavy weight shock proof gear oil...
price less if you take it as is, when you buy it I will fix the minor things if you give me the cash, i have no money to do it my self .... so i give you the title and its yours but I'll fix it with you money you front for the repairs and give you receipts, I know the car inside and out. IF YOU WANT I'LL PAINT THE car where it NEEDs PAINTED or you ca chage the color in my grage. The car WILL look like new if you give me the funds to fix it before i deliver it to you...
http://c1.ac-images.myspacecdn.com/images01/71/l_3b4a5d31b0bdcf8c6fc4f17099c118b0.jpg
http://c2.ac-images.myspacecdn.com/images01/87/l_149f797546155f427f403026dd05d3e1.jpg
http://c1.ac-images.myspacecdn.com/images01/128/l_426f84cd5324264e41ba6409bd827ab0.jpg
http://c4.ac-images.myspacecdn.com/images01/15/l_0c137122f75e9bf78d9039550156caf7.jpg
call me ANY TIME I NEED TO SELL price is negotiable within reason, we'll talk it over 1 304 639 3346
located 1 hour west of pittsburgh
1991 Sentra SE-R
Gun metal metallic its a fresh color, best G/M I could decide on
Second Owner!!!!
NEW ALTERNATOR Manufactured by Nissan!!!
NEW TIRES on 15x6.5 rims mag aluminum lighter the stockers !!!
NEW Engine 117,000 miles NO sledge!!
NEW O2 sensor
THE CAR IS FRESH!!!
The car has $6,000+ put into it and countless hours of love.
It was my daily driver,I'm not selling it because there something wrong, believe me I WANT TO KEEP it but alas my future depends on this sale.
comes with a spare head and various other parts....new wheel bearings, and brake pads as well
I purchased the car when I was 15 rebuilt it from the ground up, there isn't a nut or bolt that i haven't turned on the car. striped to bare metal, all rust Fixed correctly...I'll even give you a cut rate price to repaint it in the future...
while on the subject, the paint is bubbled on the hood from the heat when the old motor blew up, a chip by the passenger side door handle, and a bubble on each side where I fixed the rear fender wells. (BUT! they will ot come through the paint for another 2-3 years...) it has a det ow i the feder due to my girl frieds maniac brother tried to kill me with a saw saw and kicked the fender I can get a new one for 18$+ shipping and would be a tremendous opportunity to get the car painted at cost by my family's body shop. Any color but I would prefer that you paint it gun metal. BUT if you paid for it you could do what ever you want...
Engine
-New motor 117,xxx
-SS AC header, test pipe 2.5 HKS cat back w/ magnaflow muffler
-CAI - custom intake to behind headlight comes *** h Grass roots heat shield.
-Wire tuck- 80% concealed (makes it easier to work on, access is still easy)
-NGK ignition coil, NEW high power ignition chip, and 9mm wires
-battery in trunk
suspension
-AGX struts 4-way adjust in front, 8 in the back
-Full polly kit (all suspension, sweybars, 2/4 motor mounts)
-slotted and drilled rotors (gold calipers match valve cover and engine parts)
- new ball joints
-may fresh bolts from putting the poly kit on, especially in the back, Such as the 12"? bolts that hold the controller arms to the hub i the back (PITMFA to get out of the hubs FYI)
Exterior
I have a set of eagle hammer rims from 1991 15x 6.5 makes for some old school sickness
-blacked out headlights
-custom grill with death beam driving lights
-DE-badged
-200sx side skirts
-240sx front lip
-shaved antea
interior 8-10
-nice head unit (mp3 and sat alight ready)
-4 sony explode speakers
-oil pressure gauge
- blue led stock gauge interface
-seat belts to custom pillar belts
the car is super nice for the year you know how it is to find a b13 in good shape these days, let me know if your interested I'm Want to negotiate with my LOVE's buyer...believe me I'm screening out you kids that are going to wreck it...
It Needs:
rear driver side brake caliper, E brake cable, RED LInE super heavy weight shock proof gear oil...
price less if you take it as is, when you buy it I will fix the minor things if you give me the cash, i have no money to do it my self .... so i give you the title and its yours but I'll fix it with you money you front for the repairs and give you receipts, I know the car inside and out. IF YOU WANT I'LL PAINT THE car where it NEEDs PAINTED or you ca chage the color in my grage. The car WILL look like new if you give me the funds to fix it before i deliver it to you...
http://c1.ac-images.myspacecdn.com/images01/71/l_3b4a5d31b0bdcf8c6fc4f17099c118b0.jpg
http://c2.ac-images.myspacecdn.com/images01/87/l_149f797546155f427f403026dd05d3e1.jpg
http://c1.ac-images.myspacecdn.com/images01/128/l_426f84cd5324264e41ba6409bd827ab0.jpg
http://c4.ac-images.myspacecdn.com/images01/15/l_0c137122f75e9bf78d9039550156caf7.jpg
call me ANY TIME I NEED TO SELL price is negotiable within reason, we'll talk it over 1 304 639 3346
located 1 hour west of pittsburgh