gtswrx
09-08-2009, 10:43 PM
Setup:
Roller rocker stock block
Decked GTi-R head with 203psi compression across all cylinders
444cc + Z32 MAF
GTi-R T28 w/Front mount intercooler 11x30x2.5 - 2.25 in/out
Calum RT B14 ECU
Innovate LC-1
When at WOT and about 4600 rpm, the timing disrupts and will not show what should be from the timing map.
In the screenshots below is a log from a WOT 3rd gear run, and at 4600rpm the timing goes down to 3 degrees.
I must confess that the knock sensor is damaged and the ECU knows because its throwing all along code #34. I strongly believe this could be the cause, but I like to hear some thoughts.
http://ciudad.latinol.com//kefka/3rd_WOT_Run.JPG
http://ciudad.latinol.com//kefka/Timing_map.JPG
Roller rocker stock block
Decked GTi-R head with 203psi compression across all cylinders
444cc + Z32 MAF
GTi-R T28 w/Front mount intercooler 11x30x2.5 - 2.25 in/out
Calum RT B14 ECU
Innovate LC-1
When at WOT and about 4600 rpm, the timing disrupts and will not show what should be from the timing map.
In the screenshots below is a log from a WOT 3rd gear run, and at 4600rpm the timing goes down to 3 degrees.
I must confess that the knock sensor is damaged and the ECU knows because its throwing all along code #34. I strongly believe this could be the cause, but I like to hear some thoughts.
http://ciudad.latinol.com//kefka/3rd_WOT_Run.JPG
http://ciudad.latinol.com//kefka/Timing_map.JPG