I have to some various VE parts im gonna try and get rid of here..

I have 2 Blocks, with oil squirters still. both are in decent shape.
have all mains. have the cranks one is bad has #3 piston spun.
2nd isnt all that bad has a scratch about a 64th of an inch in #2 main.
Have all the Oil Pans for both also

Have a set of 20VE pistons, with new oem bearings, were installed but engine
never started. Got another bottom end due to scratch on main bearing. and used it.

Have another Set of 20VE pistons with #3 rod bad, the rest look pretty good.

VE Oil Pump
VE Dizzy
VE TB

Am also considering Selling the VE Head, with VE MAF, and Calum tuned ECU
for a B14, with rev limit @7500, EGR Del, Rear O2 Del, Speed Cut Del.
but id prolly want somewhere around 850 or something.
Because it would be a install and go package. all that would have to be done is the holes drilled and tapd in the head.
Or maybe a Trade for a Complete turbo setup. depending on the setup. Would need to be LowPort Compatible
****Edit**** If the package sells, The Summit RPM Switch will be included. its not digital, but it works.
If your interested Make some Offers..

Calum basic or realtime?

for 850 its got to be a r\t ... hows the dizzy look

No its just basic. but figure thats a good starting point..

Since last i seen heads alone are going for 600-700.

this would include everything needed to run, except the bottom end, and harness..

but im more interested in trying to get rid of the rest of the stuff. if not ill prolly just scrap it.

ANd the VE Dizzy looks fine, never used it. Modded my DE..

But i will try to get Pics up before the Weekend.

willing to just sell the solenoids???

No i wont part out the head parts, its a package or nothing.
But the head is problably not available, *** im gonna do a head swap

VE Intake mani available? could you take pix inside the blocks please? like from the bottom up?