|
compleckz 09-12-2009, 04:08 PM have a garrett T3/67H0 journal bearing turbo, i was wondering if i would need a restrictor with my -4 an feed line and what size if so. or could i just go to a -3 an line to restrict the flow a bit. I have seen turbo's die due to people over oiling their turbos with either a line too large, no restrictor, or both TIA mike4387 09-13-2009, 01:43 AM I would say yes, but other people will tell you that you don't. I would us a .065 on it, thats what I used before I went to a ball bearing. compleckz 09-19-2009, 11:35 PM I would say yes, but other people will tell you that you don't. I would us a .065 on it, thats what I used before I went to a ball bearing. thanks man, was waiting for someone to answer mike4387 09-21-2009, 12:58 AM np, thats a sick turbo good luck | ||