Hi
I just put on my Tein SS suspension on my 91 Sentra SE 4 door B13 i was wondering what Ride Height measurements & Damper Force Adjustments did u used. My spring rate is 450 Front 340 Rear i am using the instruction manual settings of 59mm or 2.32 inches front and 47 mm or 1.85 inches rear with a damper adjusted 8 clicks from the hardest setting.

The thing is the car is riding like a bouncing ball i will like to used the car for track evens but it is my Daily car as well. any help would be of grate help
thanks

this is the car
http://i513.photobucket.com/albums/t335/enoehttemi/DSC00770.jpg

front
http://i513.photobucket.com/albums/t335/enoehttemi/DSC00772.jpg

rear
http://i513.photobucket.com/albums/t335/enoehttemi/DSC00771.jpg

I started off with 8&8 to soft for me, now I'm at 12&12 pretty stiff and nice.

They starter at fully clockwise stop position which is the hardest setting them 8 clicks counter clockwise to the position that they are at now so if i go to 12&12 i think that will be a softer setting or do i have this wrong
thanks

bump.