Hi!! This is my first post. My name is Ismael and I'm from Spain, (barcelona) :-).
I was read this forum for a several time. I'm to grateful with this comunity because I resolved all problems I was arise in the swap.
I swapped my old sr20de of my nissan primera gt (p11) for "new" sr20ve.

This is my setup:

Valves 1 mm oversized on intake and 2 mm on exhaust.
Valves at 30º for more turbulence.
Bc spring.
Stock ve cams.
Stock ve maf.
Stock ve inj. 333 @ 4bar.
Stock ve pistons.
Flywheel 9-lb
Intake and exhaust polished at mirror.
Metal gasket.
Cai.
Headers 4-2-1.
The vvl intake are activate at 5100 rpm and exhaust at 6100.
My ecu is: similar that b13 is: bosch 23710 70J00
If is posible the rev limit. at 8200 rpm.
I looked a post with some bin for my ecu but it can't adjust to my setup.
I tried to download the base of my ecu but I can't download it. When are downloading I don't know why
Sorry for my bad english :( .
Thanks for all!!!!