I have a harness that was converted i think. Its for the sr20ve. It is what I got when i bought the motor and its rigged. I need someone that might know something about it and clean it up. It ran in the car that the motor was from but now its not and its a messed and just want it to be cleaned up and check to makes sure its alright and nothing bad.

this post is from a while ago but w.e lol

If you think about it, its just wires lol go through it all and look at all of them. make sure none are broke, freyed, melted, ect...

Check the plugs too, make sure there isnt anything in them or broken clips and stuff. You can prolly go to any computer or electronics store and get a can of air or cleaner or something to spray in them to get the dirt/dust and shit out.

If it is, FIX IT lol. Just get some electrical tape/zip ties and bundle the wires back up nicely because im sure the tape or w.e thats on there now is shot and gross.