all the ones I have seem to be corrupt

I have a 11:1 compression motor (due to SOHC pistons)
2 exhaust cames
intake
Header
exhaust
electrical fans

if someone has tune for this setup then that would be nice if not I will start with a Stock S13 KA24DE 5 speed bin

Thanks in advance

Adam

Stock bin attached. You might try the Hybrid KA forum for a high compression bin.

Edit- dang, it's already been posted so I can't attach again. Argh.

Calum,

can you email it to amyasin@gmail.com?

Which Hybrid KA forum are you talking about?

Thanks

Adam

http://eccs.hybridka.com/

Calum I have a couple of questions. I found the following tune on the forum and wanted to get your thoughts. My concerns:

http://eccs.hybridka.com/viewtopic.php?f=11&t=1588

I have 11:9 compression he has 11:3 (Which I can fine tune and shouldnt be an issue)
His parameters are in KM/H
to make sure: I need to make sure the distrtibuter is set to stock before i retard the time via the ECU?

If that doesnt work I wanted to use the following stock tune. I was reading about potnetial issues between maps made for 28 ECU and 24ECU? Would it be safe to use the bin to work off of?

http://eccs.hybridka.com/viewtopic.php?t=6

Thanks again for your patience in helping me out. I am getting there

Adam