|
: mechanical water temp, oil pressure guages sakerocket1 09-15-2002, 01:00 PM I was thinking of wher to drill and tap. I thought about the thermostat housing or the one housing that is on the other side in front of the #1 cyl by the upper hose. Would it be ok there? And for the oil pressure I can remove the sending unit altogether with no probs right? Nismo87SE 09-15-2002, 09:05 PM http://www.sr20deforum.com/showthread.php?s=&threadid=25724 http://www.sr20deforum.com/search.php?s=&action=showresults&searchid=64670&sortby=lastpost&sortorder=descending SuperblkStalion 09-16-2002, 12:24 AM Originally posted by sakerocket1 I was thinking of wher to drill and tap. I thought about the thermostat housing or the one housing that is on the other side in front of the #1 cyl by the upper hose. Would it be ok there? And for the oil pressure I can remove the sending unit altogether with no probs right? yes you can drill on the housing taht is in front of the #1 cyl, and the second oil thing also a big yes. jr Pretty White 09-16-2002, 01:11 AM Try tappig the housing in front of the Thermostat housing. | ||