Need help! [Archive] - SR20 Forum

: Need help!


krusher_69me
10-29-2009, 05:37 PM
hey calum i got this ecu a while back, supposedly its the first R/T ecu you did for the rwd sr. i belive tekkie was the one who scored it for the guy. i'm confused as to which programs it is that i am gonna need. will you please shed some light!? here is what im working with:

http://i86.photobucket.com/albums/k115/fast240/oct31.jpg

its going on a blacktop. if you need anything else please tell me.

billc
10-30-2009, 04:43 AM
You might want to start by studying a few of the posts available here:

http://www.sr20forum.com/realtime-ecu-support/

Then come back with specific questions.

Calum
10-30-2009, 10:38 AM
If it's tek's friends in El Paso they still owe me a S13 SR20DET core.

What's the setup on your car?

krusher_69me
10-30-2009, 11:17 PM
If it's tek's friends in El Paso they still owe me a S13 SR20DET core.

What's the setup on your car?

not sure on the core i got this when i traded my rb setup but i will ask next time i see him.

740cc injectors, t3/t04e 60 trim .82ar, front mount 2.5in intercooler piping, 3in exhaust, walbro 255, peak boost top mount

Calum
11-02-2009, 09:57 AM
What injectors?

krusher_69me
11-02-2009, 10:30 AM
nismo

Calum
11-02-2009, 01:03 PM
Z32 maf?

krusher_69me
11-02-2009, 01:27 PM
not yet, but i will
get this week

krusher_69me
11-03-2009, 11:39 AM
picked up z32 maf

krusher_69me
11-06-2009, 07:47 PM
????

Cliff
11-08-2009, 11:59 AM
What is it that you need, exactly?

Calum -

Let me know the cost for the S13 SR20DET core and I'll send it to you to offset Brandon's failure to send you the core.

krusher_69me
11-09-2009, 10:30 AM
yo tek, remember me i had that brown s13 convertible? anyways i need help setting this thing up not sure which programs i need to download, some of the links posted are no longer working. i can tear a motor down blind folded but still learning when it comes to the electronics.

krusher_69me
11-12-2009, 10:13 AM
i still need help.

Calum
11-12-2009, 11:31 AM
http://www.sr20forum.com/rom-ecu-tuning-file-exchange/258383-s13-det.html#post2486091

Follow the steps in the quick start guide sticky, upload the above.

Download conZult, start car, run conZult and check for codes. Look at raw sensor data so you don't have something goofy like 0 or 5V on your maf signal. See how car runs. :)

When you wire the maf whatever you do don't short the +12V to ground, it will let the magic blue smoke out of the ECU.

Ask whomever you got the ECU to ship me a core back? Probably a lost cause, I'm guessing I'm out a S13 DET core. :P

krusher_69me
11-14-2009, 10:43 AM
thanks a bunch calum i'll get back to you