B13 with a sr20 ve [Archive] - SR20 Forum

: B13 with a sr20 ve


mwnismo
12-19-2009, 09:00 PM
hi guys i got a b13 sunny with a sr20 ve in it i want to find out somethings
1= f i put in de sr16ve not de n1 piston an put in stronger vavles springs an management how much hp i will reach.

2= is a cold air intake essential to de car

billc
12-20-2009, 07:21 AM
1. The SR16VE cams will give you 5 to 10 whp and extend your power band to higher RPM so that when you shift to the next higher gear, you will be at higher RPM (more power) as well. There is some talk about losing power at lower RPM with these cams, but it either doesn't happen or is not very noticeable. It's not necessary to change the valve springs, just drop in the cams. Your money would be better spent on cam gears and tuning.

2. No. Many swear by the JWT POP charger.

gtirwezz
12-20-2009, 08:24 AM
bill i think he is talking about the pistons not the cams dude?

you could put SR16VE pistons in yes, your CR will be close to 13:1 though, get the valve reliefs cut 1mm deeper to bring it down a touch and you will need the skirt machining a bit more for the oil squirters. you should see some higher numbers with the raised CR but it will need a good tune also

mwnismo
12-22-2009, 11:18 PM
ok note well takin question so f i put in both sr16 ve cams an pistons wa horsepower i will be lookin at?


And will i be able to beat a dc5 honda r a 18 type r ?

mwnismo
12-25-2009, 12:40 PM
wa compression sr16 ve pistons will give me ?

2 wa compression de n1 pistons will give me ?

skcusloa
12-25-2009, 12:45 PM
just go turbo and destroy

nismo94tuner
12-25-2009, 05:19 PM
The SR16 pistons will bring compression to 13.2:1 or so without modification, IIRC.

The N1 pistons I believe bring it to the mid 13's? Not sure on that one.

I am running a basic modded VE and have beat up on the DC5's. As far as the type r, I have raced plenty of B series hondas making over 200whp and walk all over them.:)

The turbo cars have a very hard time with my VE on the giggle gas.;)

mwnismo
01-24-2010, 11:11 AM
ok thats is good to hear
i fell i gin put in de n1 cams fa now management an c wa happen first.

mwnismo
01-24-2010, 11:14 AM
The SR16 pistons will bring compression to 13.2:1 or so without modification, IIRC.

The N1 pistons I believe bring it to the mid 13's? Not sure on that one.

I am running a basic modded VE and have beat up on the DC5's. As far as the type r, I have raced plenty of B series hondas making over 200whp and walk all over them.:)

The turbo cars have a very hard time with my VE on the giggle gas.;)

Question. You say u are runnin on a basic modded ve wa modification do u have