I just purchased a 91 GTiR for cheap, but it has had the crap beaten out of it. I am going to restore it but i am on a budget since i already have an S13 money pit. I am wondering what parts are interchangeable or if they would be the same as some other nissan

I am going to need a new ebrake cable, brakes (rotors + pads), Urethane Bushings + engine mounts, struts Or maybe coilovers, ball joints, tie rods, headlight bulbs (I want PIAA), where i could find a windshield? - Canadian part numbers would be greatly appreciated

The Headlights have a hack job HID's in, i want to restore the harness to stock; anyone with a wiring diagram to guide me?

Also what fluids do you guys recomend for the engine, transaxle and diffs?

thank you for reading

Also, i forgot about the clutch master cylinder, i need a new one or a rebuild kit

part numbers- http://nissan4u.com/parts/sunny/er_n14/1991_5/type_23/ , you can basically use some stuff from the b13- for the clutch slave you have to rebuild it. more info- http://www.canadagtir.com/forum

front brakes are off an nx2000 with abs with ad22vf calipers ( i personally would not bother and go with a fastbrakes big brake kit)
front struts can be taken from a b13
rear brake discs are unique to a gti-r, caliper comes from an infiniti g20 p10 model
engine mounts, not sure if they are shared, but you can buy inserts, but get ready for it to rattle the shit out of the car, you can buy new oem ones,
coilovers, really the only two options are tein and bc racing and k sports if you want them new.
ball joints not sure
i have some used tie rod ends that are still in good condition if you want them, i have a bumpsteer kit.
you can get a windshield directly via nissan. they're roughly 700 cdn with taxes
clutch slave and cylinder, slave u can get new from nissan for like 70$ and the cylinder you can get for around 120 new

IIRC Maxima (95-99) tie rods are the same. For motor mounts, you can get the Powerflex motor mount kit on Ebay UK which are meant for the GTi-R or you can use MOST of the mounts from a Prothane kit for a B13 Sentra. Nismo torque mounts (front and rear) are on Ebay here in the states from ericsperformanceparts (user ID). Clutch slave can be found on Ebay UK for cheap. Also, try Ebay Australia and UK for stuff like performance and used parts.