i have a 1996 nissan 200sx sr20de. my clutch pedel dropped to the floor and i can pull it back up and it stays up untill i force it back down.. my clutch flrok was broken.. it was actully bent till the point that it broke.. can i jsut pull it out and drop another one in those throw out berrings? and cause it broke would that mean that i would also need a new clutch or pressure plate? help pleasee!!

i have a 1996 nissan 200sx sr20de. my clutch pedel dropped to the floor and i can pull it back up and it stays up untill i force it back down.. my clutch flrok was broken.. it was actully bent till the point that it broke.. can i jsut pull it out and drop another one in those throw out berrings? and cause it broke would that mean that i would also need a new clutch or pressure plate? help pleasee!!

yes you can i just had the same problem im waitng for the new parts now. im pullig my trans out this sunday its pretty easy to do once you have it apart if you have any ?s feel free to give me a call 609-968-5105

i fond out the possible outcomes of everything thanks bro.. now i just gotta find out if i can weld that clutch arm back.. into place.. anyone know if i can? *** it appers that the fork is okay.. just the clutch fork arm ontop craked in half but is still on there.. im going to try a new cable tomm..

you can weld it but it will not hold forever. i just did the same thing. you can get the part brad new from gspec performance so like 40$. yeah it sucks taking the tranny out and everything just to change this one cheap part but it really isn't that bad.

Yes you can pull it out and drop another one in. After you drop the trans. There's two holes you gotta use a punch to get the pins out.

and if you dont have one invest in a tranny bracket from miko. i swear by the damn thing