I have a b13 and I plan on doing the big brake upgrade all around. I plan on using 94 Maxima rear calipers and Nx Front calipers and the Jdm Nx Discs all around. My question is, if I get the Nx front caliper, can I use my b13 front caliper bracket on them or do I need 2 get a Nx 1? And Does the same apply to the rear?

You will need the ad22 bracket from an nx

where are you getting the jdm nx disc from?

Autozone or Kragen

To the top

You can't reuse any of the stock brackets.

C

You also gots to upgrade lyour mastercylinder to a 98 altima se.or splurge and cop a ksport front upgresade and use maxima rears.im preety sure the maxima rears might be slightly bigger then the ad22

If the rear are bigger then the front might b a lil dangerous braking

You also gots to upgrade lyour mastercylinder to a 98 altima se.or splurge and cop a ksport front upgresade and use maxima rears.im preety sure the maxima rears might be slightly bigger then the ad22

Splurge on a K-Sport BBK? Why not just go with a Wilwood setup?

thats good im going to be doing the same on my b14
front nx with hawk hps and rear maxima with axis pads
cant wait!!!!

what master cylinder upgrades are available for our cars?

Honestly if you guys are going with AD22 fronts leave the rear's stock! The AD22 front and Maxima rear combo works OK, but depending on master cyl and PV choices the rears like to lock up first. This is a matter of preference but I was not a huge fan of that combo.

There is really no need to change MC unless you switch to the Wilwood front kit. Otherwise the Stock MC or NX MC are fine.

Honestly if you guys are going with AD22 fronts leave the rear's stock! The AD22 front and Maxima rear combo works OK, but depending on master cyl and PV choices the rears like to lock up first. This is a matter of preference but I was not a huge fan of that combo.

There is really no need to change MC unless you switch to the Wilwood front kit. Otherwise the Stock MC or NX MC are fine.

What pads were you running?
I thought it was GregV that said he used race pads up front and crappy pads in the rear ,and had great results.It seems like that sorta offsets the front to rear bias difference.

JDM NX2000 had the NX ronts,Max rears and NX master cyl from the factory,for whatever thats worth;)

Good info:) Thanks Btw, isn't the b13 and Nx2000 master cylinder the same?

Good info:) Thanks Btw, isn't the b13 and Nx2000 master cylinder the same?

Nope the SE-R and NX master cylinders are different. On a side not the NX is considered a B13 so when you refer to B13 it could mean either or in my eyes.

Oh ok.