|
coolblackser 09-18-2002, 10:48 PM I am a 200sx se-r owner. :) I have been researching this topic for some time now, I have come to the conclusion that Andreas Miko/JGY are the guys to talk to. I will be saving up money for an BB sr20det, i would like to know how i can get 300whp safely, what mods will get me there? "Safely" daily driver setup, but able to stomp any ss or stang on the weekends. And everybody hates honda's so kill them too!:mad: Any info helpful ;) spdracerUT 09-18-2002, 11:17 PM Some turbo bigger than a t28 I think. How much bigger is up to you. 370cc injectors won't cut 300whp either so you'll need to step up there along with the fuel pump (walbro or Ztt) and a bigger MAF. Oh yeah, you'll need a new fuel rail (FTF/JGY) to mount those injectors. Khiem Victorious 09-18-2002, 11:35 PM You should run a T3/T04e, ,a larger maf(preferably a 300ZX TT), a JGY Fuel rail, 50/lb injectors, a Walphro 255lph fuel pump, a front mount intercooler thats about 18"x6"x3", a 2.5" dp, a 3" exhaust, an ACT Extereme/SS clutch, and ES or JWT motormounts. I think that covers about everything you'll need to safely run 300whp. SE-R Newbie 09-18-2002, 11:58 PM Hey coolblackser, Have you talked to Jay Whitley (813-546-3524) in Tampa? He does some clean installs and knows his stuff too. SE-R Newbie v8killer2001 09-19-2002, 12:06 AM Yes, I install these engines for a living here in Tampa, FL. I suggest you buy the motor from Andreas or Jason. I have purchased several engines from Andreas and they have all been very clean inside and out. I would not hesitate in recommending one of his engines. Hit me up if you the cleanest, most reliable, install you have ever seen :) Later, nismo200 09-19-2002, 01:30 AM Originally posted by Victorious You should run a T3/T04e, ,a larger maf(preferably a 300ZX TT), a JGY Fuel rail, 50/lb injectors, a Walphro 255lph fuel pump, a front mount intercooler thats about 18"x6"x3", a 2.5" dp, a 3" exhaust, an ACT Extereme/SS clutch, and ES or JWT motormounts. I think that covers about everything you'll need to safely run 300whp. That should be well over 300WHP from that list... spdracerUT 09-19-2002, 01:38 AM Well, all depends on how far you crank that boost :) Add in a set of cams, and you better hold on! Khiem | ||