Hi people, i how much boost can i put into a Stock SR20VE and what results would i get??? im planing on doing a project in my 200sx and this is an option... im planing on using the high CR of the VVL and a little of boost to get it to good numbers...

Please coments... has anyone tried this???

Please do some reading, and come back with specific questions. There's been a fair bit of discussion on the topic, and numerous people who've boosted VE's.

C

Ok, i know some people that boosted VEs... but i havent find anyone that boosted a stock VE... they always put internals... i need to know if i can put a T28 turbo on the VE and how much boost could it handle... stock... before breaking the pistons or rods...:biggthump

get an egt, look up the melting point of the stock pistons, find out what the stock rods can handle, and take it to a dyno.

then balance between the egt, afr's, and dyno numbers, when u get close to any of the limits, look at your boost gauge there's your answer.

This answers all your questions:

http://www.sr20forum.com/new-members/149841-search-tips-hjbarker-crew.html

Best of luck to you.