My friend may be picking up a 5 speed NX1600 with a blown tranny for real cheap, like 500 canadian, and he wants me to help him put an SR20DET in. I think it would be wise to jsut put an SR20DE in and get it running, then go from there. Anyways, to convert from GA16DE to SR20DE you need:
SR20DE motor,
SR20DE wiring harness,
SR20pass. side motor mount,
SR20ECU,
91-94SER orNX2000 tranny (are ther any others that fit?),
B13SER axles,
SER rad hoses,
SER guage cluster
Anything else?

Obviously ES MM's and a heavy clutch while were in there.
Anybody have any other suggestions or know how to do the swap? I know there was a link to a site that shows how to put the DE in but i searched and couldnt find it.
Thanks

Flywheel, flywheel bolts, steal plate between motor and trans, SR20 MAF, SR20DE Radiator and Trans mount

95-97 200SX SE-R trany fits too, also it does not have 5 th gear popout.

Also make sure you get the right year harness 91-92 harness has cable for the speedo and 93-94 is Electronic speedo.

Thats all I can think of now.

Andreas Miko

Don't forget to upgrade the brakes.

i did a 1.6l to det in a 97 what a pain in the ass

hey, muleman can you help me out with my swap?