I have 2 (nearly) complete, but dissembled engines.

This is perfect for those looking for a bracket, bolts, sensors, and other little misc things.

One is a low port from a P11 (rusted cylinder walls) and the other is a high port from a P10 (spun bearings).

Pricing:
I'm not looking to make a bunch of money, I just have these engines laying around, and I know what it is like to build SR20 cars. So I figured instead of scraping them, I would let you guys get what you needed.

Shipping:
If it will fit in a flat-rate box, that is the way it will ship. If not, it will ship FedEx. Buy pays shipping.

The engines are not at my house, but at a garage 20 mi away. I will be making 2-3 trips a week to get parts out, so expect things to ship within 2-3 days.

Pictures:
If you need pictures of anything, I can supply them, but you will need to give me a day or two.

Paypal fee:
I can't stand when sellers tack on the infamous "paypal fee". When I give you a price, that is the price, not that plus 3%.

Let me know what you need, and I will get back to you with a price.

-Nick

I need a bell housing dust shield and the set of bolts that hold the tranny and engine block.
-dave
shipping zip code: 06033

I need a bell housing dust shield and the set of bolts that hold the tranny and engine block.
-dave
shipping zip code: 06033

The ~2"x2" piece of black powder coated steel with 2 short M6 bolts?

I am pretty sure I have it. Let me make sure, and i will get back to you.

The ~2"x2" piece of black powder coated steel with 2 short M6 bolts?

I am pretty sure I have it. Let me make sure, and i will get back to you.

I need one too if you have another.

I was refering to the large piece of sheetmetal that gets installed behind the flywheel against the block and the bolts that hold the transmission to the engine.
-dave

Oh... the spacer thing... I need the little black dust cover and the two small bolts!

if you have a valve cover price+shipping please thanks

I was refering to the large piece of sheetmetal that gets installed behind the flywheel against the block and the bolts that hold the transmission to the engine.
-dave

Oh, ok. I may have one. I'll take a look.

Oh... the spacer thing... I need the little black dust cover and the two small bolts!

I know I have one, just a matter of finding it in 1000sqft of parts... I'll take a look

if you have a valve cover price+shipping please thanks

I have a few. Nissan or Infiniti? Zip?

LMK PLEASE! That little thing you can put in an envelope for .42C :)


I know I have one, just a matter of finding it in 1000sqft of parts... I'll take a look

LMK PLEASE! That little thing you can put in an envelope for .42C :)

I will let you know. Hopefully I can get out there Friday. We haven't seen this much snow in decades, so it's hard getting around.

Also, I could throw it in an envelope, but it probably wouldn't make it to you--Frist Class postage is $.44. Plus, USPS is pretty strict these days, and with the bolts it will be classed as a package and postage will be closer to $2.00.

Either way, if I have it, I'll let you know.

I was refering to the large piece of sheetmetal that gets installed behind the flywheel against the block and the bolts that hold the transmission to the engine.
-dave

Hey, I got your spacer. Where are you located?

Any luck on that little plate? Thx!

Any luck on that little plate? Thx!

Not yet. I have 3 upper pans though, so I should have three of those plates. It is just a matter of finding them. I looked around for 2 hours the other day and nothing. I'll be going back out tonight for an hour to look through some more stuff.

do you have high port intake manifold

do you have high port intake manifold

Yep, I got one. It's still on the head, but I can take it off Tuesday for you.

you got a maf/afm shipped to 07076?

How's $40 shipped USPS (uninsured), or a little more to ship it FedEx.

I need the t-shaped engine mount bracket (passenger side) and the three bolts that hold the engine mount to the t-bracket. What is the price shipped to 23606. Thanks. This is for a sr20de.

How much for the low port cams shipped to 01902

Pm'ed you !