ok guys dumb question time.

i blew out the bulb 4 my passanger side fog light. i started takin it apart but realized that i have no clue. help me:eek: how do i change the bulb?????
:confused:

1st take out the 2 screws that hold the plastic around the housing. Then i think there is only like 1 or 2 bolts that you have to remove to take the housing out from the bumper. (unhook the wiring from the housing befor the next step its easier)

There is a like 4 screws on the back of the housing, take those out then you should see the metal clip that is the only thing holding the bulb in. If i remember right its an h3 bulb.

I still havent figured out how to re align them though.
Does anyoune know how to do that?

Hope that is enough info.:)

After you remove the black cover, there is -one- screw that holds the assembly in and it's in the upper-inside (upper left on DR side, upper right PASS) of the assembly, recessed a bit. You will most likely turn one of the two adjusting screws by accident. They are the two on each side of the lense. The screw holding the housing in looks different than those two.

To adjust the beams, you use the two adjusting screws. IIRC the upper outside one is vertical, and the lower-inside one is horizontal. I usually pull my car about 8-10 feet from a wall and unplug the headlights, to adjust them.