power window problem [Archive] - SR20 Forum

: power window problem


alex160
02-19-2010, 09:18 PM
Ok, pulled the passenger side window down.. threw something out and then I was supposed to pull it up again.. started to move a bit, but then stopped.. it's annoying, cause it is snowing like hell :P

Anyways.. I can hear the motor trying, but nothing is happening.. read here about brushes or something.. anyways.. I just want it fully up.. don't care if the motor isn't working atm.. can I take out the door panel on the driver side and just take it with me to the other side, just to connect the cables and pull the window up? or is the motor on the driver side totally different? And how do I get to it.. I take of the door panel and then what.. everything is inside the door... not that easy to stick my hands in.. or is the motor the black box the button is coming out of?

alex160
02-19-2010, 09:54 PM
lol, googled the crap... I can now see that it is the shit inside the door yeah.. how do I get in there.. can I take of another panel under the door panel? or is it only the small holes? can I get the window up in any way?

martin_g34
02-20-2010, 09:34 AM
I'm pretty sure you can manually raise your window by turning the motor by hand. Take off the door panel and locate the motor, you should be able to stick an allen wrench in there and turn it. Good luck!

alex160
02-20-2010, 11:30 AM
I'm pretty sure you can manually raise your window by turning the motor by hand. Take off the door panel and locate the motor, you should be able to stick an allen wrench in there and turn it. Good luck!

good tip :) think that can work.. have the panel off now.. felt my way to a hole in the engine, put the allen in and started to turn.. at first it fitted well, but nothing moved, besides the allen loosing resistanse and is now just turning around without any resistanse in the hole :/ hard to see in there.. can't see the actually engine besides the bottom of it.. only got two small holes to look through!

alex160
02-20-2010, 11:50 AM
aaaargh.. getting so provoced by this :p want it to work! how the hell do they mount this shit, when you can't get in there... is there another panel you can remove that I am just to blind to see?

irish poet
03-04-2010, 03:28 PM
You can pull the window up while hitting the button to raise the window, just replaced the motor on my passenger window, has to HELP the window up to get it closed.
Hope that helped.




aaaargh.. getting so provoced by this :p want it to work! how the hell do they mount this sh*t, when you can't get in there... is there another panel you can remove that I am just to blind to see?

alex160
03-04-2010, 07:02 PM
naa, couldn't pull it up! wasn't the engine that was dead.. It's the little black box which the button is connected to.. it didn't send the correct ammount of power down to the engine.. but I could make the window go up by sending some power into the correct cable :) so just need to find a new thingy at the junkyard :) I wonder if a nissan sunny one will fit.. I've heard that the nx2000 or 100nx as it is named where I am from is similar to the sunny..