|
: what plugs should be used in sr20ve? InfinityS 02-24-2010, 09:46 AM currently using denso ik20.. the engine original came with BKR6E-N last time.. i thinks its time to replace the plugs again... any suggestion? blusteelsr20 02-25-2010, 06:39 AM I would use the same BKR6E-N NGK plugs it came with from the factory. wearurpjs 02-26-2010, 11:16 AM Ive been using bkr6e but I just bought a set of bkr6eix which are iridium. They're about 7 bucks a plug. InfinityS 02-26-2010, 07:50 PM Ive been using bkr6e but I just bought a set of bkr6eix which are iridium. They're about 7 bucks a plug. what gap u using the bkr6eix? wearurpjs 03-06-2010, 06:10 PM what gap u using the bkr6eix? good question, that's what I'm trying to figure out. They're pre-gapped at .32. bump anybody? DaMasterPNut 03-06-2010, 06:48 PM I use NGK BKR7E without any issues CarZ 03-09-2010, 02:03 AM I agree with you on that. BKR6E-N would be more compatible on your car since it's the one used from the factory. Other brands would be great too, but you can't go wrong with stock. | ||