How hard would it be to convert the stock 5 speed to G series 6speed? Obviously it would have to be non-hydraulic, bar shift linkage. I know there are some people that had the same thought I did so let me know what you think?

There's a write-up on this. People use the Spec-V Trannies

Oh, ok my knowledge of the Spec V's are vastly incorrect then. I thought all spec V setups were hydraulic.
THanks

spec v trannies are in fact hydraulic. You will need to use hydraulics to get it to work sir.

i already figured it all out, turns out you can just use the clutch fork from the b14 trans and grind it down a little to fit where the one from the hydraulic is. then mod abunch of little things while using most of the same electronics. theres a page on here that shows you how to do it but i cant find it at the moment.