JIC Titanium muffler (with removable silencer), 3" mandrel bent aluminized tubing, Magnaflow 3" resonator.

Worked awesome with my uncorked VE, probably just as awesome on a turbo setup. Sound without silencer here:

http://www.youtube.com/shigspeed#p/a/u/1/Tsk-xF81tGQ

Pics:

http://farm4.static.flickr.com/3009/4592392061_df22b0d442.jpg
http://farm2.static.flickr.com/1106/4592388593_c068c899a0.jpg

$400 obo. Rather not ship, but I can if needed.

In NorCal.

_SHig

Looks great. Wish this fit on a p10! Free bump for you sir.

Made to fit with a cat or straight to the header?

Would it fit on the nxb13 chassis?

Would it fit on the nxb13 chassis?

They are different. I have both an NX and a SE-R

Bolts to cat (or test pipe). I have a gutted and piped cat if it'll move the setup. ;)

_SHig

They are different. I have both an NX and a SE-R

Where's the length difference? If it's between the suspension and the bumper, this unit fit really deep under the SE-R. Maybe it will fit in an NX?

I built it short to keep it less ricey looking.

http://i160.photobucket.com/albums/t177/shigspeed/VE%20Swap/DSCF7210.jpg

_SHig

Willing to ship to 30281? This would likely fit up under my JDM bumper almost perfect

I'll ship anywhere if someone covers freight! :^)

You're right though, it probably would fit the shorty bumper nicely!

_SHig

This Catback will fit a NX but have to be modified from axle back to the hangers. So my NX catback I put it on my Sentra but was about 4-6" short to the hangers.

So, I bought my Sentra to an exhaust shop and had to add about 4-6" of pipe and had to replace all the hangers.


Edit: so if the person wants to put in his NX then there modifying it might not be as bad as the other way around, since the Sentra's chasis is a quite bit longer than the NX chasis.

Okay, that's cool. The rear hangers on the can are strapped on so it wouldn't be too tough to bend some new hangers there.

_SHig