Does anyone make a modified/parts to modify SE-R tranny's? If so, what's their website? I have a 92 Sentra SE-R, and want a little more beef in my tranny before I started putting higher #'s down on the dyno from my DET. Lemme know. Thanks.

If you have a turbo you will need a stronger clutch for sure, and it would be a very good idea to weld the tranny case so it doesnt snap. That's pretty much all you cn do without riping it apart and havingthe gears cryoed. You may want to think aobut runningredline shockproof gear oil as well.

I am running a 6-puck clutch, and a 35% over stock pressure plate. I am running Redline, but couldn't afford the shock proof this time around. Though I do change my tranny fluid more frequent than normal for paranoia's sake.