do any of u know if the rear differential, axel and hubs from a 300zx TT fit in a s14 chassis?

From the TT Z, the rear diff, and the axels do not work.

From the NA Z, the rear diff works with R200V 240sx ouput shafts.

The brakes and hubs from the NA/TT Z do work, youll need the ebrake cable from a Na/TT Z for the ebrake to work on your car, its a little short but you can remount it.

If you need any of these parts, I have them, email me or respond here.

how much for the Z32 brake/hub/ebrake swap?

$200 + shipping for everything which includes:

Aluminum calipers

Rotors

Hubs

Aluminum Spindles, if you use 300zx spindles, (not necessary
but their 7 lbs light then 240sx spindles) youll
need to upgrade to 300zx rear struts.

dust shields

ebrake cable(s)

and some used brake pads with 90% life left.

you have a PM

this is for front and rear yes?

Originally posted by Xsanity
you have a PM

this is for front and rear yes? No, this is only for the rear. Thats what 1FstS15 was talking about in his original post.

Right now, all I have from the front is the rotors.

hmmm....

on the off chance do you know the size difference on the z32 rear brakes compared to the s13's?

Originally posted by Xsanity
hmmm....

on the off chance do you know the size difference on the z32 rear brakes compared to the s13's? The rotors I have are 11.5". Im not sure about the measurements of an S13's rotors. But basically there as big or bigger than your front rotors.

Plus the calipers are solid mount calipers, yours are floating calipers.

I may still be interested. if you dont' have any other offers I'll let you know by wednesday. are they stock rotors?

editted out stupid question...

Originally posted by Xsanity
I may still be interested. if you dont' have any other offers I'll let you know by wednesday. are they stock rotors?

editted out stupid question... yeah, there stock rotors.

Thanks for being patient with me, I get paid this friday and will know wednesday if I can afford them or not. I will be having my mechanic install these plus some z32 front brakes etc. when i can source some... so on the rears this is a complete setup for the Z32 brake upgrade? Will I need to get a brake rebuild kit from Nissan? Do you know what year Z32 the calipers are off of so I can try to source a similar pair for the front?

Thanks again for being patient with me, I am really interested in this and am 90% sure that i'll be able to afford it. thanks again!

Originally posted by Xsanity
Thanks for being patient with me, I get paid this friday and will know wednesday if I can afford them or not. I will be having my mechanic install these plus some z32 front brakes etc. when i can source some... so on the rears this is a complete setup for the Z32 brake upgrade? Will I need to get a brake rebuild kit from Nissan? Do you know what year Z32 the calipers are off of so I can try to source a similar pair for the front?

Thanks again for being patient with me, I am really interested in this and am 90% sure that i'll be able to afford it. thanks again! Yes its a complete 1990 Z32 rear brake set. You will need to buy rear brake lines for a 1990 300ZX. Other than that everything is there, including the hubs and spindles, and as far as the spindles go you can either use them or throw them away.

I doubt the calipers will need to be rebuilt, it looks like it just had a brake job done before it got into a front end collision. I will ship the brakes completely installed on the rotor and attached to the spindles. So there will be no jig saw puzzle to solve as far as what goes where when installing them.

Alright, i've been trying to research all of this,
my setup before I'm going to try to install this:

91 240sx fastback no HICAS or ABS, j30 VLSD.

what I will be getting from you:
Aluminum calipers
Rotors
Hubs
Aluminum Spindles, if you use 300zx spindles, (not necessary
but their 7 lbs light then 240sx spindles) youll
need to upgrade to 300zx rear struts.
dust shields
ebrake cable(s)
and some used brake pads with 90% life left.

Parts left to source to complete this setup:
300zx rear struts
ebrake cable extension kit
PDM S13 to Z32 SS brake lines
2 lower ball joint seat Part # 40173-33P00


correct me if i'm wrong...
I gleamed all this information from the following fresh alloy threads... Of course i'll need to do the front 5 lug swap and z32 front brake swap also. But the rear parts seemed harder to come by (at least for the full spindle swap.) any opinions on the whole proposed setup? If you are selling them did you plan to do this swap then decide otherwise?

Thanks again,
-Michael

http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=323635&page=&view=&sb=&o=&fpart=1&vc=1

http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=340866&Forum=UBB9&Words=z32&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=1week&Main=329241&Search=true#Post340866

http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=343178&page=0&view=collapsed&sb=5&o=&fpart=1#Post343229

Originally posted by Xsanity
Alright, i've been trying to research all of this,
my setup before I'm going to try to install this:

91 240sx fastback no HICAS or ABS, j30 VLSD.

[b]Parts left to source to complete this setup:
300zx rear struts
ebrake cable extension kit
PDM S13 to Z32 SS brake lines
2 lower ball joint seat Part # 40173-33P00


If you are selling them did you plan to do this swap then decide otherwise?

Thanks again,
-Michael
Nope I never planned on using these on my car. I dont even own a 240sx, I just work on them. These were going to go on to my neighbors car, but he decided to sell them to raise funds for completing his VLSD swap. Hes running 12.7's with an open diff. so we figured we might as well upgrade the diff before he upgrades the brakes. I also have a spare VLSD if you know anyone who needs one.

BTW I have the lower ball joint seats also, but I have to check to see what kind of shape there in. If there good, you can have them for free. As far as the rear struts go, if you really want to save money, I can see what kind of shape the struts on the wrecked Z are in.

Your set up sounds about right. Who makes a e-brake extension kit? I had no clue anyone made one.

Actually the e-brake extension kit was just listed in another post i'll probably have to find somewhere that carries them...

As of right now I am set on getting these items from you, did you figure out how much shipping would be? edit, sorry i'm used to b15sentra.net and i don't think i have "pop up box when pm'd " turned on here.

thanks for getting back to me i'll let you know asap

Originally posted by Xsanity


thanks for getting back to me i'll let you know asap No problem.

Hey guys,

Here is my 300zx brake swap artice:

300ZX brake swap (http://importnut.net/300zxbrakeswap.htm)

This will give you an idea of what you need to do.

Also, for your diff questions:

LSD swap (http://importnut.net/lsdswap.htm)