i'd first like to say hey to all the nissan guys! this is my first post, so i figure i'll offer a group buy to start.

these collectors are for anyone looking to create their own manifold or have a local fabricator do it for them. this is the hardest part of making a manifold....

the collectors are made of 316 stainless steel, 8 gauge wall thickness, 5inch runner lengths, completed with deep penetrating, strong TIG welds. the design of these collectors allows for zero reversion of exaust gas flow.

similar collectors are made by burns stainless, but are of 18 gauge(very thin, and crack prone) wall thickness. they are charging upwards of $290 each

for this group buy we will need at least 10 orders and the collectors will only be $180 each.
we can also TIG weld either a t25/t28, t3, or a t4 flange for an extra $40 which includes the price of the flange!

here are some pics, sorry my camera is really low quality.

www.peakboost.com/collectors.htm

i will drop the price down to $169 each, if we can get 15 orders...

thanks guys, and its good to be aboard.

ken peak
www.peakboost.com
:D

Well I would like to say that there is nothing similar or the same about those collectors and the Burns collectors. The only thing that your collector and the Burns collector have in comon is that they are both collectors thats where the similarities end. I have used Burns products for years and have had no problem with cracking yet NA and Turbo. Also you can get 16 guage metal if you request it. NA 18 guage and Turbo 16 guage. Building the collector that you built is so easy and also I can have that same collector built for a lot cheaper. There is a guys on here that builds Tubular manifolds for a good price and they are complete and ready to go. If you need one check Bruce Collins at Protech Manifolds.

Andreas Miko