I have 2 sets each of the following brand new Overkill Engineering Motorsports parts for sale for the 91-94 B13 Sentra:

- Front camber mounts. Under mount style, NOT top mount. Complete as sold by Overkill including camber plates, spherical bearing mounts, adapters, needle bearings, and all nuts/bolts/washers. $150 shipped. (to accurately compare price, the $95 upcharge for camber adjustability must be added to the base price on the manufacturer's website)

-Rear spherical bearing shock mounts. Complete as sold by Overkill including mounts and all nuts/bolts/washers. This is the standard mount, NOT the offset mount. SOLD.

Would prefer to sell as a complete front/rear set if possible.

PM if interested.

Hey buddy do you know the difference between the top mount and the bottom mount of the b13 camber plates n mounts.same thing on the rear what's the difference between the offset and the non offset?

Hey buddy do you know the difference between the top mount and the bottom mount of the b13 camber plates n mounts.same thing on the rear what's the difference between the offset and the non offset?

Product descriptions on their web site:

http://www.overkillengineeringmotorsports.com/nissan.html

Pat

Prices are 100% negotiable. Need to get these out of here.

What Strut type is this for? Does it have the mount for lowering springs or coilovers? Does it come with bump stops?

Thanks

What Strut type is this for? Does it have the mount for lowering springs or coilovers? Does it come with bump stops?

Thanks

X2

Did you buy these for regular struts or are they for coilover setup??

The sets for sale in this post were requested to be compatible with Progress coilover shock shafts.

Only the parts listed in the original post are included. You will most likely need additional items from Overkill to make them work depending on your setup.

There are no top hats or bump stops included in these sets. According to Overkill, you will need to modify your own or purchase them from Overkill seperately to use them with 2.5" springs.

PM me with an offer. Prices are negotiable!

One set of rear mounts have been sold. Still have both front sets and one rear set left.

Remaining parts are still for sale.

Still available.

are the rears solid or pillowball?

Not solid. They have bearings as noted in the original post:

-Rear spherical bearing shock mounts. Complete as sold by Overkill including mounts and all nuts/bolts/washers. This is the standard mount, NOT the offset mount. $110 shipped.

Still available.

the front mounts your selling are for coilovers right??

these ones:
http://www.overkillengineeringmotorsports.com/91se20g20nxf.html

I believe the front mounts are designed for stock shock/spring style. Might work with coilovers if you get the right top hats. Should confirm with Overkill directly. See post #7 above.

This is the kit that is for sale: http://www.overkillengineeringmotorsports.com/91se20g20nxf.html

i have hypercoils, i will do some more research' I need to find out if these will effectively lower the front a bit more, without taking up any suspension travel.. (as some camber plates do)

my hypercoils leave my car looking like it's lowered more in the rear, so this would be all about cosmetics for me.. as I won't be adjusting the camber often enough to make a real impact on my driving.

Just replied to your PM. The front mounts are camber adjustable, not solid, so you need to add the upcharge to the price listed on their site to accurately compare to my asking price.

Lowered asking prices in original post.

Update: I bought a pair of the rear mounts.

It was cool to meet-up for a personal exchange.

Update: I bought a pair of the rear mounts.

It was cool to meet-up for a personal exchange.

I agree!