i got a 96 200sx i got 92,000 miles on my sr20....how safe would it be to run a 55 shot on it??? all i have is cai and exhaust...dont know how reliable the car might be *** a shot....help......

an sr20 will giggle at a 55shot and ask for more :D

i know i got a strong motor i **** didnt know how strong it would be when t gets close to 100,000 miles on it

several guys on this board, along w/ myself, installed their nitrous at 100k. just compression test it and you'll know exactly what kind of shape its in.

and where can i take it to get compression tested????????????/

What happens is you spray on a motor with low compression. Mine is at 150 across the board (yes, in know that is the very minimum). What would be the hights shot recomended?
thanks

Originally posted by nismoman20
What happens is you spray on a motor with low compression. Mine is at 150 across the board (yes, in know that is the very minimum). What would be the hights shot recomended?
thanks

I think you have the wrong idea.

Just make sure the engine is in good working condition. A compression test would determine a lot of things for you.

Originally posted by nss200sx
and where can i take it to get compression tested????????????/

if you can't find a friend to do it, take it to pretty much any mechanic and they can do it for you. make sure they do it twice, the second time w/ oil in the cylinder. that'll let you know if its the rings.

Originally posted by nismoman20
What happens is you spray on a motor with low compression. Mine is at 150 across the board (yes, in know that is the very minimum). What would be the hights shot recomended?
thanks

spraying a motor with low compression is begging for trouble. it'll just exacerbate any problems you already have. make sure its in good working order, or you may end up seriously damaging it. hopefully its just the guides or seals, and its a "fairly" easy fix. if its the rings, well, its a pretty big PITA (pain in the ass) :(

what about runnning a leak down? i'll have my friend do that for mine.