|
: Blower resistor bad how do u know?? 94 se-r 10-03-2002, 02:40 PM When you take out your blower resistor from underneath the glove box when you pull it out how do u know its bad....... please help the reason why is that my doesn't work in postiion 1 and 4 but work in position 2 and 3 94 se-r nx2000racer 10-03-2002, 03:07 PM you cant tell by looking at it, its bad if your fan motor only works on setting 4, and is dead on 1-3. AaroNX 10-03-2002, 04:23 PM IF you think its bad replace it, since it doesn't cost that much in the first place. turbo b13 se-r 10-03-2002, 09:45 PM Originally posted by nx2000racer you cant tell by looking at it, its bad if your fan motor only works on setting 4, and is dead on 1-3. yup, thats the only way you can tell....I gotta go get me one :o SteveB 10-04-2002, 09:20 AM I'm an electronics type, so I took my blower resistor out because of non-working speeds (can't remember which ones) to try and fix it. I could see straight away that the 'resistor' was just printed circuit tracks, no actual resistor as such, and the problem was a solder joint that had suffered from high temperature deterioration. I just got rid of the old solder and resoldered it some 3yrs ago and it's been fine since. Geo 10-04-2002, 10:32 AM If position 4 isn't working, I'll bet you it's the switch itself since position 4 doesn't use a resistor. | ||