ITR_KILLR
10-03-2002, 11:35 PM
anybody running 555inj, instead of 50# top feed
|
: 555inj ITR_KILLR 10-04-2002, 03:59 PM the 555inj don't require a custom fuel rail, right? Big John 10-04-2002, 10:08 PM Apexi 555's her and Z32 MAF. no mods to the factory rail required. Also using a Nismo adj. FPR. John Yellow4g63 10-05-2002, 12:44 AM Yeah he got Da hook up on those injectors Yo :D Big John 10-05-2002, 01:29 AM chroo ***, thanks again! ITR_KILLR 10-07-2002, 09:54 PM do you have a fuel pressure gauge? do you by chance have any pics? Big John 10-08-2002, 02:12 AM I have a NOS in line fuel pressure gauge under the hood. I have some pics around here somewhere. PM me with your e-mail addy and i'll send it your way. john ITR_KILLR 10-08-2002, 08:31 AM kwik2kil@aol.com darren109 10-09-2002, 05:03 AM where can i buy these injector? i looked on the apexi web site and didn't see them. ITR_KILLR 10-09-2002, 02:19 PM heavythrottle maybe Jspec 91sentra_se-r 10-14-2002, 12:22 AM How much you guys paying for 555 inj. thanks Yellow4g63 10-14-2002, 02:43 AM http://www.phase2motortrend.com/ This guy wayne runs it he use to be a DSM guy but went back to nissan real good guy. sr20de+the t 10-15-2002, 10:15 PM I USE 555 INJ *** J.W FUEL RAIL. Big John 10-16-2002, 09:01 PM If you are referring to 50 lbs MSD's, the actually equate to 525cc. John spicez 10-17-2002, 04:24 AM Anyone know if the MSD 50 lbs injectors would be a direct fit into the Roller Rocker B15 fuel rail ? For that matter, would DSM 390cc injectors be a direct fit ? Yellow4g63 10-17-2002, 10:11 AM DSM injectors are low impedance, and u should get the 5spd DSM stock injectros those are 450cc. spicez 10-17-2002, 10:55 AM Hmm, sorry for the newbie question... How do I know if my injectors are high or low impedance ? Looking into my FSM I found the resistance is between 13.5 and 17.5 ohm, or does that not help ? Thanks in advance | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.