I have a 92nx2k, i found a good price on an s13 turbo manifold and t-25 from a sylvia. Does the s13 turbo manifold and turbo bolt right up to the fwd sr20 in my car, or will it be angled wrong?? basically, is the bb t25/manifold the same as the s13 t25/manifold...thanks in advance.....John.

I think the S-13 points the turbo to the opposite side. It will bolt up but would interfere with AC I believe.

while we're on the topic, whats the difference in the BB T25 and the S13 T25.

Originally posted by ITR_KILLR
while we're on the topic, whats the difference in the BB T25 and the S13 T25.

I think that it might be a ball bearing but that could be the s14.

I just wondered if the s13 or s14 turbos will bolt on the BB manifold.

Wrong wrong wrong. The S13 T25 is identical to the Bluebird T25. They are even the same part numbers. The only difference is that the S13 T25 needs the compressor housing rotated about .5" toward the block.

I may be wrong, but the s13 manifold is for rear wheel drive and will not fit the front drive SR's. Turbo positioning is all messed up.

The turbo may be the same.. but the manifold is different.. it points the turbo in the opposite direction.. however.. it can be done.. ask big Jon (nismodriver). He's using a RWD manifold on his B12...
Travis