http://cgi.ebay.com/ebaymotors/ENGINE-MOTOR-NISSAN-SENTRA-2000-00-2001-01-2-0L-SR20DE-_W0QQcmdZViewItemQQhashZitem5d29963f70QQitemZ40012 9671024QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries#ht_2516wt_1167


Will that fit in my 93 g20? It came out of a 2000 or so sentra

I thought your P10 had alrready a SR20 ...my advise its change the engine, gearbox and ecu all in one to your car if U going to do it

its got a blown sr20det. its cheaper to drop a new engine and drill and tap than rebuild

The SR20DET in your car is not a roller rocker motor, the engine you posted from the ebay link is a RR motor. The intake manifold and exhaust manifold you currently have on your car should bolt right up to the RR head. It doesn't look like they're including the distributor, that might be different from your current motor, maybe someone else can chime in and confirm.

Also if you are currently running a lowport manifold on your 93, you may have some throttle body clearance issues with the RR valve cover. Some solutions may be to not use the RR valve cover, or to work on a spacer between the head an lower plenium.

Othewise this should be a pretty straight forward swap.