I'm trying to swap my 91 4door xe (automatic)!!

So far I got :
96 sr20de auto from a g20
A se-r tranny
a se-r harness
A se-r ECU
A light weight flywheel
A Clutch
Se-r motor mounts

Can anyone else tell me what I'm missing !!??

Read up here (http://www.sr20forum.com/technical-information-library/87887-howto-1-6-ga16de-2-0-sr20de-t-swap.htm)

I no a couple of things that r missing but I want ta make sure I have everything be4 the swap it my daily driver!!


before you "no" a couple of things. first you must learn how to spell KNOW. along with the rest of the painful text language you speak....:tongue:

before you "no" a couple of things. first you must learn how to spell KNOW. along with the rest of the painful text language you speak....:tongue:

If your not gonna help y you bother on posting

My problem is that I'm putting in a low port and I want to know what I need to make it run on the b13

Bump

Bump

same as any other GA to SR swap the correct ECU and harness.

same as any other GA to SR swap the correct ECU and harness.
But my motor is a lowport not a highport ! A homie said I have to change some sensors?

If your starting with a GA anyway you have to start from scratch. You can use the lowport no problem because you haven't had a highport. when you swap GA to SR you have to replace almost everything from the engine, tranny, axles, mounts, etc. to the computer and harness. As long as you stick to parts from one or the other you're fine

Dack, Just search the forum as others have said all the info is out there. If your GA High/Low port is irrelevant.

If low port and not a 94 you will need OBD1 Stuff like ECU / Distributor.

A little spelling will go a long way, If you come off like writing stuff all outta wack they are not going to take you seriously.

Good luck with your swap.

Bump