REDSENTRASE-L
10-05-2002, 09:43 PM
ok. i did a search and can't find it. i have a question.
it ays to set the to TDC. how the hell am i gonna move the crank by hand!?
it ays to set the to TDC. how the hell am i gonna move the crank by hand!?
|
: s4 cam instillation questions civicdragon 10-05-2002, 10:45 PM get a 27mm? socket and a breaker bar. NismoSER 10-06-2002, 03:04 AM Yep, 27mm is correct. REDSENTRASE-L 10-06-2002, 05:36 AM i don't want to sound stupid but........that 27mm is for the crank pulley right????:confused: NismoSER 10-06-2002, 11:31 AM Yep, use the 27mm socket to turn the crank pulley. SE-Rican 10-07-2002, 04:05 PM Make sure you take your spark plugs out before you try to turn the enigine over. REDSENTRASE-L 10-07-2002, 06:56 PM Originally posted by SE-Rican Make sure you take your spark plugs out before you try to turn the enigine over. OOPS! i didn't do that. why is that?:confused: Storm88000 10-07-2002, 07:17 PM Originally posted by SE-Rican Make sure you take your spark plugs out before you try to turn the enigine over. Why? I guess you are referring to building compression before starting the engine with new cams, but you can usually just do that by pulling the ignition coil and cranking it.... civicdragon 10-07-2002, 11:18 PM Well I've heard its a little easier to turn the crank with the plugs out. The engine is trying to compress air when you turn the crank... REDSENTRASE-L 10-08-2002, 12:47 AM actually, the crank is really easy to turn. Sunny 10-08-2002, 12:32 PM put the car in nuetral/e-brake down, then rock the car front to back and watch as the pulley moves to TDC. Tevs | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.