I am prepping to do an enduro event, ok its a crapcan race aka chump.. and am concerned about oil temps getting high while running the car 14 hours straight. I want to add an oil cooler and need some advice. In my searching I've found alot of dead links, kits that are no longer for sale, and mostly DET set ups. Does anyone have a kit they'd recomend for a NA B13, and where did you mount the cooler?

any feedback on this kit? I'd think the 200sx and sentra SE-R kit would be interchangeable...


http://www.partstrain.com/store/details/Nissan/200SX/Flexalite/Oil_Cooler/1995/SE-R/4_Cyl_2-dot-0L/F213951.html

Any help and advice is appreciated

Couple threads that might help. couple things might be different but i think the general concept is the same.

http://www.sr20-forum.com/general-sr20/34188-oil-cooler-install.html

http://www.motoiq.com/magazine_articles/articletype/articleview/articleid/1632/pageid/2201/project-200sx--track-ready.aspx

Which Chump Car event are you doing?

Thanks

Couple threads that might help. couple things might be different but i think the general concept is the same.

http://www.sr20-forum.com/general-sr20/34188-oil-cooler-install.html

http://www.motoiq.com/magazine_articles/articletype/articleview/articleid/1632/pageid/2201/project-200sx--track-ready.aspx

Which Chump Car event are you doing?

doing the chump car challenge in Charlotte on the 23rd

doing the chump car challenge in Charlotte on the 23rd

Ah, cool. Some friends of mine and I are doing both Nashville events. If the car holds together, you should try the one in July.