The classic that I just bought was missing the stock fog-lamps and the wiring for them. The only wire that I have been able to find comes from the drivers side headlight wiring. The end of this wire has a connector on it, so it seems that I should be able to go to the dealer and buy the other end of the wiring. My question is if this is the only wire that's used for the fog lamps or is there something else that I might need. And if any of you with an FSM might have a part number, because when I tried to go to the dealer they looked at me like I was nuts. TIA

Martin

I believe the fog lights were dealer add-ons. Also, if I remeber correctly, I saw on se-r.net that since they were dealer installed; that they can be installed/wired in quite a few diff't configurations. If you are serious about fog lights, I would just recommend buying some aftermarket lights, and wiring them up the way you want (on w/ parking or headlights, whatever).

I bought some Pilot fog lights from AutoZone for $20 that look very similar to the stocks b/c my stocks were taken off by the previous owner.

Josh