here's my car as it stands
http://sleeping91ser.tripod.com/racecar/engine.txt

here's what i'm looking for help on
http://sleeping91ser.tripod.com/racecar/wires.txt
http://sleeping91ser.tripod.com/racecar/wire.txt
http://sleeping91ser.tripod.com/racecar/clips.txt

and this hose
http://sleeping91ser.tripod.com/racecar/hose.txt

Ok around the TB you should have 3 extra plugs. Two are egr related(useless)and the other is the california egt. It looks like the hose is the one that goes to the intake manifold itself. Need a bigger picture of it. Not sure about the two plugs on the pulley end of the motor. There is a plug that goes to the brake or power steering, I can't remember which one, but it goes on hard lines right in front of the firewall. If you get under the car on the passenger side you should see it. Check and see if its one of those. I wish I was closer I would come and help you.

Originally posted by AaroNX
Ok around the TB you should have 3 extra plugs. Two are egr related(useless)and the other is the california egt. It looks like the hose is the one that goes to the intake manifold itself. Need a bigger picture of it. Not sure about the two plugs on the pulley end of the motor. There is a plug that goes to the brake or power steering, I can't remember which one, but it goes on hard lines right in front of the firewall. If you get under the car on the passenger side you should see it. Check and see if its one of those. I wish I was closer I would come and help you.
Thanks a lot Aaron, so I guess I'm good on the TB side cause I only have 3 extra connectos other than the tps which I need to put in, and the O2 which needs to be put in and the maf which needs to be put in. And on the left one is for ABS probably cause my car doesnt have it, so just really need to find out about that one plug I guess, I'm in good shape then, Thanks I do appreciate it any more input would be appreciated-I've done this before but its been a while and no fsm this time which makes some things take longer.
sean

If you can post some more pics of the stuff you haven't figured out yet I might be able to figure them out. If I can't remember I have a FSM either way.

In the first pic with the three connectors, the one on the left looks like one of the tranny switches, and the one on the bottom looks like the ground that goes on the connector at the tansmission case to me.

The second pic on the left of the engine, one of them looks like either the temp sender or the oil pressure sender connector. (the white or light grey one.) the other one i am not to sure.

Hope that helps.
Rick