|
: Who knows their hoses well??? serof93 03-11-2001, 04:08 PM OK, I cleaned by TB recently and connected back up all the hoses going to the main intake hose. Here's the thing though, and I'm sure I did not remove this one. I noticed that by the intake hose on the side closest to the airbox, there's now a J shaped hose pointed downward that does not appear to have any place to hook up to. It's not a vaccuum hose, as I've put my finger over it. Is it some kind of vent hose? Anyone know what I'm talking about? redman007 03-11-2001, 07:06 PM sorry don't recall, haven't seen stock intake in 9 years. ------------------ 91 SE-R,10:1 comp.pistons,balanced &blueprint rebuild.comp.4angle valve job,extrude honed heads/intake manifold,No emissions.crap,RC TB/MAF,nismo cams,UR pulleys,stillen4-1 ceram.header,nismo/centerforce dual fric.clutch,PR CAI,2 1/2 test pipe,mandrel 2 1/4 superturbo ex.,and a whole bunch of other goodies! boost is in the works ,hell yeah 3:16! 03-11-2001, 09:16 PM I did mine this weekend too, taking note and taping everything with post-its to make sure I hooked everything back up. That "Upside-down J-tube" was NOT connected to anything - not sure what it was for and I thought it was kinda strange too, but it don't go anywhere... serof93 03-12-2001, 12:07 AM Thanks man! At least that's one affirmation that I'm not a moron. =) Bowlcut 03-12-2001, 01:00 AM Replied in the general forum also Its the tranny vent tube. 94_REDSE-R 04-18-2001, 04:41 PM COOL, I didnt know what the heck that thing was either. One less topic I have to post. Good thing I didnt plug it up!! ------------------ "Spidey" 3x ex-Honda owner | ||