We have my friends car back together but the damn thing just won’t start. I don’t consider myself a moron but I can’t figure it out. We have swapped a high port motor in as a replacement for a blown low port. Swapped the temp sensors. Injectors are spraying, sparkplugs are sparking. What’s the deal? I checked most of the passenger side harnesses and can’t figure it out. It wont even hiccup.

make sure you have the fuel lines the right way, also with my jdm i had them the right way and it wouldnt start, then i reversed them and it didnt start, then i put them back and it did start. You might have a clogged FPR if you are using the one that came with the JDM/Used engine. In my case i guess when i reversed them i unclogged it, but after that it ran crappy under 1500 rpm, so i replaced it. Might wanna check the fuel pressure. Good luck

Check the MAF. and TPS

Shawn, call me.

Oh yea, the obvious is to check and make sure you have the disty in right, it could be 180 out. Good luck

The distributor won't go in 180 off.