|
Lamchop 09-18-2001, 04:14 PM Ok, I'm ready to shell out some $$$ for a CAI. Which one is the best for a '93 Classic, and how much increased power and noise should I expect? Should I also have it "re-routed" to the bumper area (where the driving-lights are)to get the best effect? TIA http://www.sr20deforum.com/NonCGI/biggrin.gif Storm88000 09-18-2001, 06:18 PM Place Racing. MarC 09-18-2001, 06:19 PM Hotshots ------------------ MarC 93 NX2000 JWT POP charger 15.5 1/4 mile http://members.home.net/mnmanderson/Dcp_0002sig.jpg Pretty White 09-18-2001, 06:35 PM AEM http://www.100nx.de/pics/ian1.jpg [This message has been edited by Pretty White (edited 09-18-2001).] MarC 09-18-2001, 07:00 PM LOL ------------------ MarC 93 NX2000 JWT POP charger 15.5 1/4 mile http://members.home.net/mnmanderson/Dcp_0002sig.jpg borguesian 09-18-2001, 07:19 PM Well I might at well add my 2 cents in here.... Umm... make a custom one http://www.sr20deforum.com/NonCGI/wink.gif . Just kidding HS and PR are essentially the same thing. ------------------ Greg Taylor Black 96 200SX SE-R More info on my car (http://home.earthlink.net/~borguesian) 97 Black SER 09-18-2001, 07:31 PM Custom cold air by Andreas. ------------------ 97 Super Black 200sx SE-R Hotshot CAI, custom 2.5" catback with dynomax super turbo muffler, Hotshot header, UR pulleys (2 set), JWT ECU, Stillen FSB, Courtesy RSB, V-Racing Buzz seat with custom seat bracket, JUN CAMS (264's 10.5mm lift) Pretty White 09-18-2001, 08:02 PM Custom Cold Air by Andreas might be the key or this by me.... http://www.angelfire.com/ny/ianjiggyroom/images/Warm_Cai.JPG slowSER 09-19-2001, 07:34 AM AEM's new intake has been dyno proven to make 4-5 more HP than Hotshot or Place CAI's. ------------------ '93 Sentra SE-R, daily driver and track/autox toy '91 Sentra SE-R, future racecar 09-19-2001, 08:33 AM I have the CAI from Place Racing. I paid extra for the silver one. The coating is very good, but they do not make it from one tube. They weld a few together. I had hoped they used one tube with smooth bends. Its not bad though, they do grind down the welds on the inside where the tubes jet out. Also you get one mean sound when you step on it. I think thats my favorite part. You may have to get them to ship you an adapter plate for your mass air flow meter (MAF). The original one they sent me was the wrong size. Hope this helps, best of luck. Lamchop 09-19-2001, 08:50 AM I understand there's a group deal going on for the AEM on the SE-R mailing list too. Maybe this is perfect timing. Thanks all. -D | ||