I am trying to figure out how to wire the power door lock button, if you can please look in the manual, and tell me which wire goes to what.

Thanks

Should be a purple wire and a gray wire, with a black ground. The gray wire controls locking and the purple wire controls unlocking. Both are negative pulse, switch grounds out appropriate wire to either lock or unlock.

There is a purple wire and a gray one, but I also have a red with green stripe and red with orange stripe. I found out those must be for the light that inside the button...I am not concered about those. There isnt a black thin one though, there might be a black one for the window switches.

I think it shows that way on my schematic to show polarity of the switch and may not be an actual visible wire. But I've hooked up alarms and keyless entry systems on B14's and the purple/gray is the standard neg. pulse lock/unlock combo. If you need anything else, let me know.

I will try it out tomorrow, if I cant get it to work, I will snap some pics of the wires, and post them, and try to get some more info. Thanks