I was just wondering if anyone has a pic of the intercooler for a 91-94 sentra. The reason why I am asking is because I thought both the endtanks went down at a 45 degree angle. If I am looking at mine correctly the 2.5 endtank is parallel to the intercooler on the driver side and the endtank on the left is like 2inches at a 45 degree facing downward is this right? It is one nice looking piece though. TIA

That sounds right. I put one on a 97 200SX last weekend and both were pointing down. The drivers side was pointing down so the piping would go under the fog light.

that is what I thought. I have not recieved the pipeing yet so I won't know for sure if everything will still work or not. I was just wondering if anyone has the same endtanks on there f-max like I do and if everything hooked up fine with no problems.

http://www.cardomain.com/member_pages/view_page.pl?page_id=284978&page=1

both of the endtanks point downward at a 45* angle. For the passenger side, I used a straight 2 inch reducer. For the driver side, I used a 2.5 inch 45* degree connector.

Well I hope at least the pipeing that comes with the kit will fix the problem if not then I guess I am going to take it to a muffler/welding shop and have them fix which means I will have a piece of the pipeing ghetto cause it wont be the same color.
I will let you know how the pipeing works with the intercooler thanks for your replies.