Has anyone bypassed their A/C on a 95 200sx? My A/C compressor is junk...its sounds like metal to metal grinding and smoke comes out of it once in a while. smells bad too. anywayz...its much easier to just run a belt from the crank to the alternator and not the A/C and was wondering what size belt I needed? so far a 34.5 inch is too big, 32.5 inch is too small. that leaves 33, 33.5 and 34 inch. This is a really bitch job to do *** its cold outside and all...so I dont feel like playing around anymore to find the right size. thanks guys...

Get the alternator belt for a '91 SE-R w/o AC. It will be a 4 rib belt vs a 6 rib, but it will work.

I feel your pain. It took me over 5 tries to get the right belt. Do what Eric said. And remember, this "no a/c" belt is a 4 rib only but IT DOES WORK.

Thanks for the help guys...ya i think i returned belts to autozone at least 4 times hehe I eventually went with a 5 rib belt. its like 33 inches or 33.5 i think.

The stock no ac belt is a 4 rib. That is why they told you to use it. Its what the FSM says to use.

For the stock crank pulley use a 340-350 K4 belt. For a u/r pulley use a 310 k4.

can this be dangerous to the engine? you know, the crank will spin faster an all....

Dont think too much. It will work.
Im living, Drag Racing proof.

Originally posted by Majestic
can this be dangerous to the engine? you know, the crank will spin faster an all....

If I had a choice My car wouldn't have ANY belts on it. Just a free flowing crank. Hopefully before long I will only have one belt, for the alt.