Sorry if you have answered this before but I am new. So I was wondering when I swap a sr20det into the nx2000 that I am getting should I upgrade the maf sensor. Is the cobra sensor out of a mustang cobra because I have heard of this before that mustang parts go on pretty easily. I will be running a lot more mods with this swap. Hoping for around 300-320hp and around 260-270hp for daily driving. Any ways with this much power should I upgrade and how much does it cost for the sensor. What can the stock maf sensor handle. Just for future reference. Any answers to this will be helpful. Also

thanks

the stock maf is good for around 9 psi. You definitely need to upgrade it if you want to get over 210whp safely.

I think a 300zx would probably be good for you and cheaper in the long run

so get a 300zx tt maf sensor? I have heard that one will work fine also and is easy to install. So is that one a better choice for the power that I will be putting down and boost level Thanks for all your replies.

you have several choices...bored maf not good for your goals ***, 300ztt maf, and a cobra maf....all will need a reprogram with the ecu